150′ Mobile Tower, Superior High-wind Telescopic Lattice Tower


The mobile LMS 150 HD, 150′ lattice tower is designed to withstand superior wind loading. Special Clads give the tower superior resistance to winds exceeding 120mph. Proven in long term and temporary deployments. Patented Delrin Guide Block assemblies prevent freeze up, desert erosion, tower shimmy, sand and dirt stoppage.

LMS150 HD Portable Tower

  • 38′ minimum extendable to 150′ telescopic lattice steel tower system
  • Tower assembly weight 5400 lb
  • Hot dipped galvanized finish EN ISO 1461 / ASTM A123 / CSA 164 for all weather
  • Lattice base section integrated with multiple stiffeners
  • Dual torsion rod design
  • Multiple upgraded features
  • 5 ea 31′ sections with schedule 40 thickness
  • Antenna mount option
  • Weatherproof limit switches for tilt and lift operation
  • Weatherproof (locking) control panel integrating 2 switch full operational control
  • Cable storage reel anti-theft, mounted on tower base
  • 5 ea cable guide rings
  • Hydraulic 10,000 lb double ram tilt system
  • 120 VAC motor with redundant key lowering backup
  • Built-in locking system with multiple safety features
  • Certified -80º Fahrenheit environmental conditions
  • Galvanized aircraft lifting cables
  • Patented Derlin mast guide blocks
  • Loading is outstanding, exceptional loading, high wind tolerance
  • Redundant tower retraction cable system
  • Safety guards on rotatable components for protection
  • Galvanized patent pending clad kit
  • Designed for three carrier deployment
  • Designed for 2 each 8’ microwave dishes at top plus

This structure has been analyzed in accordance with the requirements of the International Building Code 2012 Section 1609.1.1 & 3108.4, and the recommendations of the Telecommunications Industry Association “Structural Standard for Steel Antenna Supporting Structures” ANSI/TIA-222-G-2. Each tower has been tested with a 900 pounds tilt and erection head load prior to factory delivery.This structure has been analyzed in accordance with the requirements of the International Building Code 2012 Section 1609.1.1 & 3108.4, and the recommendations of the Telecommunications Industry Association “Structural Standard for Steel Antenna Supporting Structures” ANSI/TIA-222-G-2. Each tower has been tested with a 900 pounds tilt and erection head load prior to factory delivery.

LMS150 HD Trailer “Patent Pending”

  • Deck 30′ Long x 8′ 2″ wide, trailer 38′, total length 45’, 16,000 GVWR
  • Trailer weight without lattice tower 5,685 lbs.
  • Gooseneck hitch standard, optional 5th wheel, pintle or bumper pull
  • 23′ X 8′ open deck space in front of base
  • 2 ea two hole 1/0 ground lugs
  • 2 ea heavy duty safety chains
  • 4 ea telescopic crane style outriggers with adjustable jacks 7,000 lb.
  • 2 ea mid trailer leveling support adjustable jacks 7,000 lb.
  • 4 ea bubble type trailer levels
  • 2 ea 10,000 lb. spring loaded heavy landing gear jacks
  • 2 ea 7,000 lb. axels each with electric brakes, flipper-spring, equalizer suspension
  • Electric brakes on both axels
  • Emergency trailer breakaway device
  • 5 ea 10 ply 16 radial tires with wheels
  • Full size spare mounted under deck
  • LED DOT lighting package and reflective striping
  • Trailer manufactured to all DOT requirements
  • MIL-STD 209K trailer tie-down and lifting lugs

LMS150-HD Weights and Dimensions

  • 12,800 lbs. shipping weight
  • 45’ 5”long
  • 10’ 4″ tall
  • 8′ 6″ wide
  • 3,400 lbs. useful load