Portable Telescopic Lattice Tower


The LMS 106 HW portable telescopic tower is proven in long term and temporary deployments. These portable antenna towers are utilized by every major carrier in the USA, and multitude of government, and state agencies throughout the US. They are the only towers authorized by Saudi Aramco Oil throughout the world, where undisturbed grounds are a priority. LMS units are the only never fail perfect fit.

LMS 106 HW telescopic tower specs

  • 106’ Model (Tower Assembly Wt. 3800 LBS)
  • 36” X 21′ Super heavy Duty Base Section
  • All sections 2 3/8” OD ASTM A500-07, A53-12, Grade B, Carbon Steel, Schedule 40 steel pipe, 55.3 KSI yield strength in constructing the complete tower assembly
  • Solid rod cross bracing with back filled welds are utilized on the complete tower. “Not machine applied” like others.
  • The main body of the tower has been analyzed utilizing the commercially available software TNX Tower version 6.0.0.8 (previously known as RISA Tower & ERI Tower).
  • 46″ Trailer integrated tower tilt base assembly supports our complete line of lattice towers
  • LMS one piece integrated base provides the strength insuring the stability we demand. Superior stability in height winds when extended to any height.
  • Lifetime warranty on tower base utility assembly
  • 3 sector antenna mount/custom mount designs available
  • Hot dipped galvanized finish EN ISO 1461/ASTM A123/CSA G164 for all weather
  • 6 ea 21’ Multiple sections
  • 3 Sector antenna mount / custom mount designs available
  • Hot dipped galvanized finish ENSIO 1461 / ASTM A123 / CASA 164 for all weather
  • Weatherproof (locking) control panel, limit switches for tilt and extension operation
  • 900:1 Worm drive allowing tower to be safely deployed at any height up to 106’
  • Backup powerless key operation allowing tower to be raised or lowered with a cordless drill
  • Theft proof cable storage reel, optional electric, multiple reels, split reels and handles
  • 6 ea Cable guide rings
  • Weatherproof (locking) control panel
  • 9000 lb. pull down winch enabling 1 minute from horizontal to vertical with load
  • 9 position guy kit
  • Heavy duty upper and lower limit switches
  • 110VAC 60HZ / optional 240VAC 50HZ
  • High strength 7-19 galvanized aircraft quality lifting cables
  • Patented Derlin mast guide blocks
  • 850 lb. tilt payload tested, 40 square foot of sail, 90 mph wind, no ice
  • Redundant tower retraction cables

Units meet International Building Code 2012 Section 1609.1.1 & 3108.4, and the recommendations of the Telecommunications Industry Association “Structural Standard for Steel Antenna Supporting Structures” ANSI/TIA-222-G-2.

Tower Trailer specs

  • Diamond plate 11 gauge deck 18′ long X 8’ 2” wide
  • Decks water-fall sides add 400% to strength
  • Trailer weight before base and tower, 4920 LBS
  • Electrical components bonded to frame for system grounding
  • Integrated tower base tilt system constructed with 4”X4”X1/4” structural tubing for extra strength
  • 11’ X 8’ Open deck space in front of tower assembly mount
  • All steel construction 10” wide beam construction, no aluminum
  • 6 hole adjustable coupler channel with removable 2 5/16″ ball hitch, Optional / Pintle, Gooseneck / Fifth wheel
  • 7 Pin RV-type connector
  • 10,000 lb. Side pull spring loaded tongue jack
  • Emergency trailer breakaway device
  • 2 ea two hole 1/0 ground lugs
  • 2 ea heavy duty safety chains
  • 4 ea telescopic crane style outriggers with 4 ea adjustable 7,000 lb. jacks
  • Optional easy slide outrigger package with roller bearings
  • Deployed outriggers footprint 20′ X 40’ when fully deployed
  • 4 ea Bubble type trailer level guides
  • Galvanized and powder coated wheels
  • 2 ea 7,000 lb. axels each with electric brakes, flipper-spring, equalizer-suspension 14,000 GVWR
  • 5 ea Powder coat over galvanized wheels LT235 /80R 16 radial tires with full size spare under deck
  • All weather padlocks and Hide-A-Key
  • DOT and Transport Canada LED lighting package and reflective tape
  • 36” steel locking tool box
  • Flashing emergency lights

LMS106-HD weights and dimensions

  • 10,700 lbs. shipping weight
  • 30’ 5” long
  • 10’ 4″ tall
  • 8′ 2″ wide
  • 3,400 lbs. useful load
  • Maximum angle of terrain in degrees for safe trailer deployment up to 7 degrees side to side, 3.5 degrees front to back without additional blocking
  • Guy radius and additional anchor design dependent on loading and winds to be determined by engineering
  • High wind all terrain off-road applications
  • Can be pulled with standard 3/4 ton pickup truck. For off-road a 4×4 is recommended
  • Equipped with lifting hooks in all four corners for helicopter lift
  • Built for rough, inaccessible terrain applications
  • Can be pulled in with bulldozers and deployed. Designed to keep most military environmental and transport applications
  • Engineered and designed to meet the rigor demands
  • MIL-STD 209K Trailer tie-down and lifting lugs
  • Comprehensive operations manual plus warranty
  • 24-hour support